AREA51 USB-C TO USB-C 4.5M

AREA 51 Wilton Pro+ USB-C to USB-C Tether Cable 4.5m / 15ft

• Tight Connectors to ensure a stable tether connection
• Uses our new hybrid-optic technology
• Highspeed with even faster transfer speeds
• 300lb rated crush-proof metal housing
• IPX4 weather sealed
• Power bridge chipset allows for an outstanding, stable 62ft connection
• Slimmer, stronger soldered connectors
• Long lengths to go further distances without needing to use additional cables, extensions or power points
• No power injection points (No need!)

To create a Power Bridge for 46ft tethering you must follow the below steps:

1. Computer-end must be plugged in first
2. Then plug in the ANGLED USB-C into the camera and power camera on
3. Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together.

If this order of steps is not followed, you will not properly connect at 46ft. If you power the camera down or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.

Compatible with most cameras using a USB-C port including, but not limited to:

• SONY A-1
• SONY A7R4
• SONY A7R III
• NIKON Z6II
• NIKON Z7II
• LUMIX S1
• LUMIX S1R
• Canon R5
• FUJIFILM GFX 100
• FUJIFILM GFX 100s

Some cameras require the extra boost from the active chipset, in this case it is recommended using Sandia Pro+ or Sandia XL Pro+ in either 4.5m or 9.5m as it can be more stable than 4.5m alone based on your camera model.

Commonly paired with:

• Sandia XL PRO+ USB-C Female to USB-C Extension Cable 9.5m/31ft

AREA51 TETHER CO. 

Cables focus on extreme speed industrial quality cables, featuring premium connectors and superior insulation. AREA 51 cables are rigorously tested to ensure reliable and stable connections, so you can focus more on your close encounters and unexplained phenomena.