Rosco Green Screen Paint 4L

Rosco Green Screen Paint 4L

Rosco Chroma Key Paints have been formulated with the assistance of video technicians. They are manufactured to provide the high luminance values and color saturation for keying effects.

FINISH: Matte.

SOLVENT: Water.

BINDER TYPE: Vinyl Acrylic.

DILUTION: Use straight out of the can. If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.

SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.

APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.

For repainting, it is recommended to re-prime with a white primer before painting the area with Rosco Chroma Key Paints – even if the color will remain the same. The white undertone will improve the luminance of your blue or green screen.

Important: Rosco Chroma Key Paints are manufactured in batches and different batches of paint may vary slightly in color. Touching up an area already painted can result in visible patches due to color inconsistencies from batch to batch. In almost every case, these patches will not affect the performance of the product.